Image via US Army RDECOM

Talking Helmets and Robot Builders: The Army's Future of 3D Printing

A researcher at the service’s Weapons and Materials Directorate lays out a vision for additive printers on the battlefield.

If you go by the Hype Cycle — Gartner’s annual tech-buzz assessment — then consumer 3D printing is about to tumble from the “peak of inflated expectations” into the “trough of disillusionment,” part of the coming five- to 10-year slog to the practical applications that await atop the “plateau of productivity.” But Larry “L.J.” Holmes, the principal investigator for materials and technology development in additive manufacturing at the U.S. Army Research Laboratory, (ARL) isn’t waiting around for that.

In a presentation last month at the Intelligence and National Security Alliance summit, Holmes sketched out a variety of potential uses for 3D printing for the military, ranging from intelligence to communications to terraforming the battlefield. Here are a few highlights.

Plastic antennas: As the electromagnetic spectrum gets packed tighter with cell phones, radios, and other tech, keeping comms up in the war zone will increasingly require more highly specialized antennas and other equipment. Rather than trucking or airlifting in the gear and replacement parts, Holmes said, troops might print dielectric antennas from nonconductive materials like ceramic or plastic. Recent research out of the University of Texas at El Paso involved making a dielectric antenna from plastic.

“It works just like a copper patch,” Holmes explained. “It works by the dielectrics that are internal to the structure, solely because of the shapes you can make through 3D printing.” In other words, it’s a not a replacement part per se, but an entirely new type of electronic communication that uses geometry to compensate for a lack of atomic conductivity in the material.

Such 3D-printed antennas made from plastic could “help us reduce logistics and the logistics trail but also help with signature management,” he told the crowd, in other words, helping a group of soldiers avoid detection when communicating.

Hidden bugs and spy cameras: Multi-material printing , which allows printed objects to incorporate working electronics, is in its infancy. But as the field develops beyond expensive toys , it will open up a host of potential applications for the military, including intelligence gathering.

Example: a milk carton with a sensor — resistor, capacitors, etc. — manufactured into the cap. Of course, real-time assessment of spoiled milk isn’t really a military concern, but this kind of thing could aid intelligence gathering in hard-to-reach places, or from stand-off distances. Everyday objects with the capacity to record voices or take pictures could do some of the work of flesh-and-blood intelligence assets.

Breakthroughs in multi-material 3D printing will also help make electronics smaller, or better shaped, for tight spaces like airplane wings, combat boots, etc.

Biometric communication: What does 3d printing have to do with brain-to-brain communication? Potentially, a lot.

The Army has been funding cutting-edge research in brain-to-computer communications for years. In 2008, it sent a $4 million dollar grant to researchers at UC Irvine, the University of Maryland, and Carnegie Mellon University to study “synthetic telepathy” via EEG sensor data. No, a sensor can’t hear your thoughts and understand them as intelligible language. But they can be sensitive enough can pick up your brain’s electromagnetic pulses. Think about raising your arm, or respond to a visual cue, and you create an alpha wave between 8 and 12 hz. Those signals can, in theory, be translated into a crude form of speech, like Morse Code. Those signals can then be conveyed to someone else, through a technique called transcranial magnetic stimulation.

Last year, a team of Spanish researchers demonstrated brain-to-brain communication via EEG, so a real-world proof exists. But getting a fully functional EEG into a helmet isn’t easy. After all, helmets are designed to protect the head from force, not send brain scans. This is where 3D printing comes in, with its unique ability to produce otherwise-impossible shapes and designs.

“Imagine if I have a helmet. You can put it in this [3D printing] machine, tell this machine to scan it, then go back and say, ‘Oh, this mission requires some communication device that I don’t have,” Holmes said during his talk. “I can tell [the printer] to rebuild this helmet and incorporate the device into this helmet as I’m building it, antennas, structured sensors. Whatever.”

In his presentation, Holmes described how materials that showed various levels of resistance to hand movement could also serve as a means of biometric communication.

“We know that soldiers do a lot of communication with their hands,” he said “With this technology, instead of having to move their entire upper body for communication,” they could use their hands and perhaps avoid detection.

Robots that build beachheads from found objects: What if you could send robots ahead of your troops to set up bases on hostile territory?

“This isn’t officially an Army goal yet,” Holmes said of a 3D printing project of his own conception called forward operations for reconnaissance and terraforming, or FORT.

It’s a concept that amounts to invasion via MakerBot. Here’s how he described it: “We drop a black box in a place where you wouldn’t want to send your soldiers. It could be a biohazard area, a radioactive area, dense jungle, the top of a mountain, a dangerous extreme environment, etc. Through a suite of sensors, this manufacturing unit senses what’s around it, what minerals are in the sand, and  what trees are around it. It then prints robots to go collect those materials, to collect sap from trees, mud and straw to make bricks. These robots bring those materials back.”

The box uses the materials to build whatever you need: a containment unit, a helicopter pad on the side of a mountain…That’s where technology is pushing us in the future,” Holmes said.

He acknowledged that figuring out how to program a series of machines—robots in various forms—to achieve that goal is a decades-away ambition. But “the manufacturing, data and sensing technologies already exist,” he says.

Holmes isn’t the only 3D printing fan dreaming of self-replicating robots conquering new, hostile territory. FORT bears a lot in common with a concept called Luna Ring from the Japanese construction company Shimizu. To harness solar power from space — where it can be gathered ten times more efficiently than on Earth —robots would travel to the moon to build more robots and solar panels and other pieces of equipment from lunar dirt.

Advanced robotics for additive manufacturing is also an area that the Defense Advanced Research Projects Agency has looked at through a program called Magnetically Actuated Micro-Robots for Advanced Manipulation Applications.

Of course, these sorts of projects are decades away, and the trough of disillusionment looms near. While 3D printing for rapid prototyping has been around for more than a decade, it was only last year that the Navy permanently installed a 3D printer on a ship for the first time. The printer aboard the USS Essex amphibious warship was used not to building replacement parts but to make scale models and syringe caps.

Printing objects that can actually match military specifications is a big hurdle. Holmes says this is one reason why some of the most fertile ground for military 3D experiments will be in the special operations community, which can work around some of the bureaucracy of military certification. The Army’s Rapid equipment force already owns five 3D printing stations, two of which were sent to Afghanistan in 2012 to print replacement parts.

It’s also an issue of money and politics. 3D printing will be revolutionizing broad areas of logistics and supply chain management long before black-box factories can be deployed to hostile zones to ready the ground for invasion. If additive manufacturing is going to save the military and taxpayers billions, it will do so at the of cost of billions in lost revenue to suppliers. If a part can be printed for pennies at the site of use that will replace something that costs thousands, then it falls on the maker of the more expensive part to defend the high price tag — which they may do by blasting the integrity or structural soundness or design security of 3D printed parts.

The trough of disillusionment can be both deep and wide.

X
This website uses cookies to enhance user experience and to analyze performance and traffic on our website. We also share information about your use of our site with our social media, advertising and analytics partners. Learn More / Do Not Sell My Personal Information
Accept Cookies
X
Cookie Preferences Cookie List

Do Not Sell My Personal Information

When you visit our website, we store cookies on your browser to collect information. The information collected might relate to you, your preferences or your device, and is mostly used to make the site work as you expect it to and to provide a more personalized web experience. However, you can choose not to allow certain types of cookies, which may impact your experience of the site and the services we are able to offer. Click on the different category headings to find out more and change our default settings according to your preference. You cannot opt-out of our First Party Strictly Necessary Cookies as they are deployed in order to ensure the proper functioning of our website (such as prompting the cookie banner and remembering your settings, to log into your account, to redirect you when you log out, etc.). For more information about the First and Third Party Cookies used please follow this link.

Allow All Cookies

Manage Consent Preferences

Strictly Necessary Cookies - Always Active

We do not allow you to opt-out of our certain cookies, as they are necessary to ensure the proper functioning of our website (such as prompting our cookie banner and remembering your privacy choices) and/or to monitor site performance. These cookies are not used in a way that constitutes a “sale” of your data under the CCPA. You can set your browser to block or alert you about these cookies, but some parts of the site will not work as intended if you do so. You can usually find these settings in the Options or Preferences menu of your browser. Visit www.allaboutcookies.org to learn more.

Sale of Personal Data, Targeting & Social Media Cookies

Under the California Consumer Privacy Act, you have the right to opt-out of the sale of your personal information to third parties. These cookies collect information for analytics and to personalize your experience with targeted ads. You may exercise your right to opt out of the sale of personal information by using this toggle switch. If you opt out we will not be able to offer you personalised ads and will not hand over your personal information to any third parties. Additionally, you may contact our legal department for further clarification about your rights as a California consumer by using this Exercise My Rights link

If you have enabled privacy controls on your browser (such as a plugin), we have to take that as a valid request to opt-out. Therefore we would not be able to track your activity through the web. This may affect our ability to personalize ads according to your preferences.

Targeting cookies may be set through our site by our advertising partners. They may be used by those companies to build a profile of your interests and show you relevant adverts on other sites. They do not store directly personal information, but are based on uniquely identifying your browser and internet device. If you do not allow these cookies, you will experience less targeted advertising.

Social media cookies are set by a range of social media services that we have added to the site to enable you to share our content with your friends and networks. They are capable of tracking your browser across other sites and building up a profile of your interests. This may impact the content and messages you see on other websites you visit. If you do not allow these cookies you may not be able to use or see these sharing tools.

If you want to opt out of all of our lead reports and lists, please submit a privacy request at our Do Not Sell page.

Save Settings
Cookie Preferences Cookie List

Cookie List

A cookie is a small piece of data (text file) that a website – when visited by a user – asks your browser to store on your device in order to remember information about you, such as your language preference or login information. Those cookies are set by us and called first-party cookies. We also use third-party cookies – which are cookies from a domain different than the domain of the website you are visiting – for our advertising and marketing efforts. More specifically, we use cookies and other tracking technologies for the following purposes:

Strictly Necessary Cookies

We do not allow you to opt-out of our certain cookies, as they are necessary to ensure the proper functioning of our website (such as prompting our cookie banner and remembering your privacy choices) and/or to monitor site performance. These cookies are not used in a way that constitutes a “sale” of your data under the CCPA. You can set your browser to block or alert you about these cookies, but some parts of the site will not work as intended if you do so. You can usually find these settings in the Options or Preferences menu of your browser. Visit www.allaboutcookies.org to learn more.

Functional Cookies

We do not allow you to opt-out of our certain cookies, as they are necessary to ensure the proper functioning of our website (such as prompting our cookie banner and remembering your privacy choices) and/or to monitor site performance. These cookies are not used in a way that constitutes a “sale” of your data under the CCPA. You can set your browser to block or alert you about these cookies, but some parts of the site will not work as intended if you do so. You can usually find these settings in the Options or Preferences menu of your browser. Visit www.allaboutcookies.org to learn more.

Performance Cookies

We do not allow you to opt-out of our certain cookies, as they are necessary to ensure the proper functioning of our website (such as prompting our cookie banner and remembering your privacy choices) and/or to monitor site performance. These cookies are not used in a way that constitutes a “sale” of your data under the CCPA. You can set your browser to block or alert you about these cookies, but some parts of the site will not work as intended if you do so. You can usually find these settings in the Options or Preferences menu of your browser. Visit www.allaboutcookies.org to learn more.

Sale of Personal Data

We also use cookies to personalize your experience on our websites, including by determining the most relevant content and advertisements to show you, and to monitor site traffic and performance, so that we may improve our websites and your experience. You may opt out of our use of such cookies (and the associated “sale” of your Personal Information) by using this toggle switch. You will still see some advertising, regardless of your selection. Because we do not track you across different devices, browsers and GEMG properties, your selection will take effect only on this browser, this device and this website.

Social Media Cookies

We also use cookies to personalize your experience on our websites, including by determining the most relevant content and advertisements to show you, and to monitor site traffic and performance, so that we may improve our websites and your experience. You may opt out of our use of such cookies (and the associated “sale” of your Personal Information) by using this toggle switch. You will still see some advertising, regardless of your selection. Because we do not track you across different devices, browsers and GEMG properties, your selection will take effect only on this browser, this device and this website.

Targeting Cookies

We also use cookies to personalize your experience on our websites, including by determining the most relevant content and advertisements to show you, and to monitor site traffic and performance, so that we may improve our websites and your experience. You may opt out of our use of such cookies (and the associated “sale” of your Personal Information) by using this toggle switch. You will still see some advertising, regardless of your selection. Because we do not track you across different devices, browsers and GEMG properties, your selection will take effect only on this browser, this device and this website.